Do you know the correct operation of the screw conveyor?

Question

Accepted Answer

The correct operation of the screw conveyor is to improve the work efficiency, of course, it will also ensure the safety of personnel and reduce the occurrence of accidents. Of course, how to be proficient in the daily operation of the screw conveyor? The correct operation of the plastic chain screw conveyor is very good to improve work efficiency, of course, it will also ensure the safety of personnel and reduce the occurrence of accidents. Of course, how to be proficient in the daily operation of the plastic modular belt screw conveyor? What are the other steps? Let's introduce it to everyone!

Screw conveyor operation method:

1. Stainless steel screw conveyor personnel should be trained and certified to master the knowledge of the structure and performance of stainless steel screw conveyors, know how to operate, and regularly carry out maintenance of the machine.

2. When the operator of the screw conveyor receives the signal from the tail of the machine, it must contact the equipment of the predecessor to determine whether the equipment of the preamp is operating normally.

3. Check the screw conveyor equipment and check if there is no problem before starting the machine.

4. Jog operation on the screw conveyor equipment, normal operation after no problem after jogging.

5. During the operation of the screw conveyor equipment, the driver should pay attention to the situation at any time. If the abnormality should be dealt with in time, the temperature of the machine bearing should not exceed 75 degrees Celsius. For the chain, pay attention to the presence or absence of the chain, chain or jump chain phenomenon.

6. After the spiral conveyor has an abnormality, it should be stopped immediately, and the operation can be continued after the fault is eliminated.

7. After the screw conveyor machine equipment is shut down, the operator should clean up the equipment and record the problems that occur during the operation of the machine equipment for future reference.

8. Before the screw conveyor stops, the material on the conveyor should be emptied to avoid the screw conveyor load starting.

9. The maintenance should be carried out under the condition that the screw conveyor is powered off, and the warning sign is hung.