What are the correct ways to operate a flexible chain conveyor?

Question

Accepted Answer

The flexible chain conveyor is a common conveying equipment. It is a new combined three-dimensional conveying system based on the traditional conveyor. It can meet the multi-angle conveying task in the space, whether it is a sharp turn or an uphill It can handle it downhill. Although the flexible conveyor is continuously improved and the operation is more and more simple and convenient, we believes that professional staff is required to operate more properly, with fewer failures.

1. Boot check

Before opening the flexible chain conveyor, it is necessary to check the transmission part and the sprocket. The chain plate and the safety guard are not installed firmly and reliably. Check whether the connection of each line is loose or slippery. Check that the lubrication of the line break between the chain plates does not meet the requirements.

2. Boot according to the boot sequence

(1) First open the receiving equipment

(2) Start the chain conveyor line

(3) Start the feeding device

3. The flexible chain conveyor should be evenly fed during operation.

When transporting materials, it should not be too much, otherwise it will be easy to block and flow to the outside of the machine, which will easily cause the chain plate to derail.

4. During the transportation process of the flexible chain conveyor, any failures need to be immediately stopped for inspection and professional maintenance.

5. Usually check the tightness of the chain plate, adjust the tightness at any time to prevent the chain conveyor belt from slipping

6. Keep the line body clean and clean, and fill in the relevant records carefully every day.

8. Before stopping the machine, stop the feeding equipment first, and then wait for the material on the conveyor belt to be cleaned and then stop.

If you are in the process of using the flexible chain conveyor, you can leave a message to us.