How to solve the chain chain failure of the chain conveyor？

Question

Accepted Answer

With the rapid development of industrial production, the chain conveyor has been widely used. The chain conveyor has the characteristics of simple structure, convenient maintenance and long service life. It has been recognized by customers in practical production applications. However, the failure of any conveying equipment is inevitable, so how to solve the conveyor chain failure of the chain conveyor, let us take a look at it.

When transporting materials, the chain conveyor first sends out the operation signal, first jogs twice and then officially starts normally. After the chain conveyor runs for half a week, it stops, checks the scraper chain that has been turned over to the chute, and simultaneously detects The degree of tightness of the traction chain, whether it is beating, scraping, deviation, drifting chain, etc., no problem after no-load operation, and then load test operation.

When the chain conveyor is in operation, it is necessary to pay attention to the operation of the motor of the head of the conveying equipment. If the temperature of the motor rises and the noise increases, the inspection should be carried out carefully, the operation center should be reported, and the lowering funnel should be closed. Stop the inspection. When the chain conveyor is in operation, it should also pay attention to the lubrication condition of the head star wheel at all times. If the bearing lacks oil, it should be refueled immediately with the manual oil pump.

During the use of the chain conveyor, the operation of the chain belt should be paid attention to at any time. If the chain rail is adjusted in time, when the machine speed is slowed down, the funnel should be adjusted to prevent the material from being pressed. When the chain conveyor is running, attention should be paid to the unloading of the head funnel. If the nylon conveyor belt is found to block the material, the power switch should be cut off immediately, and the operation should be stopped to prevent the chain conveyor head funnel from blocking the chain. To check if the chain is too long, if it is too long, adjust the tail tensioning device. If the blade has a blade at the end or the chain wheel and the hopper are not flexible, the head and tail blade need to be removed; It is necessary to add thin lubricating oil to the chain conveyor chain wheel to make the chain plate wheel rotate; the third is to replace and process the inactive hopper to avoid the chain chain failure during the operation of the chain plate conveyor.

In addition, to ensure the normal operation of the chain conveyor, it is necessary to regularly check the equipment and equipment maintenance. After the chain conveyor is inspected, it must be strictly checked and accepted according to the acceptance criteria to ensure that the chain conveyor can be put into production in time after inspection. There is no failure in production.

Above, we understand the solutions and preventive measures for the chain conveyor chain failure, and are ready to ensure the smooth production of the enterprise.